Gopro Pan & Tilt works with GoPro Hero 3, 3+ and 4 or Clones.

The mount is made out of laser cut ABS plastic for durability and strength has the tilt servo in the center of gravity and its direct
connected to the pan base, there is no stress on the servo or loose servo arms to cause vibrations.

Has access of
POWER IN / VIDEO OUT  works with most aftermarket GoPro/FPV USB cables out there.

NOTE:
- TILT servo - Due to the limited space, the mount was designed to be used with a EMAX - ES08MA II - Metal Gear Servo.
- PAN servo - You can use any standard size servo, a standard size servo plate will be included. (metal gear recommended)
- SERVOS and CAMERAS NOT INCLUDED.

Version 1 GoPro Camera only Pan & Tilt
Version 2
GoPro + FPV Camera Pan & Tilt
Mobius or RunCam Camera Pan & Tilt
GoPro Pan & Tilt Camera Mount
Version 1 (GoPro Only)
Version 2 (GoPro + FPV)
PAN & TILT CAMERA MOUNTS
FPV un/cased Cameras 32mm x 32mm
FPV un/cased Pixim Cameras 43mm x 43mm
GoPro Hero 3, Hero 4
GoPro Hero 3, Hero 4 + FPV Camera (top)
Mobius or RunCam Camera
Mobius or RunCam + FPV Camera
RunCam Swift + RunCam HD2
FPV Camera Pan & Tilts
Made out of laser cut ABS plastic.

2 versions available:
FPV un/cased = un/cased camera area
32mm x 32mm
Pixim Version = un/cased camera area: 43mm x 43mm

NOTE:
- Compatible servo: EMAX - ES08MA II - Metal Gear Servo.
- Cameras and servos not included.
- Assembly required (CA or Epoxy glue recommended)

Made out of laser cut ABS plastic.
Designed for the Mobius or RunCam HD cameras.

NOTE:
- Compatible servo: EMAX - ES08MA II - Metal Gear Servo.
- Cameras and servos not included.
- Assembly required (CA or Epoxy glue recommended)

Made out of laser cut ABS plastic.
Designed for the Mobius or RunCam + FPV your camera.

NOTE:
- Compatible servo: EMAX - ES08MA II - Metal Gear Servo.
- Cameras and servos not included.
- Assembly required (CA or Epoxy glue recommended)

Mobius or RunCam + FPV Camera Pan & Tilt
Older version shown
Old version shown
Made out of laser cut ABS plastic.
Designed for the RunCam Swift and HD2 cameras.

NOTE:
- Compatible servo: EMAX - ES08MA II - Metal Gear
Servo.
- Cameras and servos not included.
- Assembly required (CA or Epoxy glue recommended)
RunCam Camera Pan & Tilt
Made out of laser cut ABS plastic. Designed to pan & tilt your Connex HD camera,
180 degree panning safe design, watch video bellow.
Fully tilting UP is possible, but
not recommend because it could cause stress on the camera cable. Transmitter
end point adjustments recommended.
180 degree on Emax servo possible with a
servo stretcher sold separately. Mounting brackets included.

NOTE:
- Compatible servo: EMAX - ES08MA II - Metal Gear Servo.
- Camera and servos not included.
- Assembly required (some joints require CA or Epoxy glue)
Connex ProSight HD Camera Pan & Tilt
Video Bellow
Caution: Fully tilting UP is possible, but not recommend because it could cause stress on the camera cable.